Send E-mail
Send SMS
Home»Products»

Construction Chemical

Offering you a complete choice of products which include floor hardener, fosroc gp2 grout, conbextra gp2, nitoseal pu 40 elastomeric sealant, sealing compounds and conbextra euw.

REQUEST CALLBACK
Ask Latest Price
We are engaged in offering a wide spectrum of Construction Chemicals (Floor Hardener) including Nitoflor Hardtop that offers seamless protection to concrete flooring from abrasions due to traffic. It is ideally used in trucking lanes, loading areas, machine shops, warehouses, parking lots, and so forth. It is formulated by using the best grades of basic ingredients in state of the art facilities under stringent quality controls.

Features:

  • Rust proof
  • Easy to apply

Applications :-

It is also being used as a

  • Floor Hardener
  • Non metallic Floor Hardener
  • Floor coatings
Yes! I am interested
REQUEST CALLBACK
Ask Latest Price
Product Details:
Packaging TypeBags
Conbextra GP2 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100mm.
Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout.

Free flow, high strength, non-shrink, cementitious precision grout

Uses

  • constructive solutions
  • Conbextra GP2 is used for precision grouting where it is essential to withstand static and dynamic loads.
  • Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc., It can also be used for anchoring a wide range of fixings. These include masts, anchor bolts and fence posts.

Advantages

  • Gaseous expansion system compensates for shrinkage and settlement in the plastic state
  • No metallic iron content to cause staining
  • Pre-packed material overcomes onsite batching variations
  • Develops high early strength without the use of chlorides
  • High ultimate strength ensure the durability of the hardened grout
  • Free flow ensures high level of contact with load bearing area


Conbextra GP2 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100mm.

Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout.

Technical support

An experienced technical advisory team is available to give technical service on request.

Properties

  • Compressive strength : (BS 1881 - Part 116: 1983)
  • Compressive strength (Nmm2) Age (days) Consistency
  • Flowable (W/P 0.18) Pourable (W/P 0.165) 1 24 27 3 45 54 7 55 66 28 65 78
  • Compressive strength with addition of aggregates
  • Age (days)
  • Compressive strength (N/mm2) W/P 0.18 % of aggregates ( IS 516 - 1959)50% 75% 100% 128 30 32 3 50 52 55 7 60 63 68 28 70 75 78
  • Flexural strength ( BS 4551, 1998)
  • Tensile strength (W/P - 0.18)
  • Pullout bond strength
  • (W/P - 0.18)
  • Time for expansion (after mixing )
  • Freshwet density
  • Young's modulus
  • (ASTM 469 - 94)
  • Dynamic load resistance
  • Flexural strength (N/mm2) W/P 0.182.5 7.0 9.0 10. 3.5N/mm2 @ 28 days
  • 17 N/mm2 @ 7 days 20 N/mm2 @ 28 days
Start : 20 minutes Finish : 120 minutes
Conbextra® GP2

Unrestrained surface area

Curing

On completion of the grouting operation, exposed areas should be thoroughly cured. This should be done by the use of Concure WB curing membrane, continuous application of water and/or wet hessian.

It is also being used as a Building construction Material in Big Buildings .

Other Information

Minimum Order Quantity: 50 Kilogram

Specifications:

  • Packaging: Supplied in 25 kg bags
  • Use: For general purpose, non-shrink grouting applications
  • Shelf Life:6 months.
  • Usage: Construction,Fixing system
  • Type: Two Component
  • MF: Mixture
  • Other Names: Chemical Anchor
Yes! I am interested
REQUEST CALLBACK
Ask Latest Price
Product Details:
Packaging TypeBags

Free flow, high strength, non-shrink, cementitious precision grout

Uses-

Conbextra GP2 is used for precision grouting where it is essential to withstand static and dynamic loads. Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc., It can also be used for anchoring a wide range of fixings. These include masts, anchor bolts and fence posts.

Advantages-

Gaseous expansion system compensates for shrinkage and settlement in the plastic state

No metallic iron content to cause staining

Pre-packed material overcomes onsite batching variations Develops high early strength without the use of chlorides

High ultimate strength ensure the durability of the hardened grout

Free flow ensures high level of contact with load bearing area

Description

Conbextra GP2 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100mm.

Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout.

Technical support

An experienced technical advisory team is available to give technical service on request.

 

  • Usage: Construction,Fixing system
  • Type: Two Component
  • MF: Mixture
  • Other Names: Chemical Anchor
Yes! I am interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Approx. Rs 550 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity10 Piece
FeaturesImpact Resistant, Moisture Resistant, Vibration Resistant, Heat Resistant, Water Resistant
Grade StandardIndustrial Grade, Chemical Grade
Surface of ApplicationCeramic, Glass
Nitoseal PU40 is a one part, low modulus gun-grade elastomeric sealant based on polyurethane technology. Nitoseal PU40 may be applied to joints between 5 and 35mm wide. To minimise stress imposed on the joint sealant, all moving joints should be designed to an optimum width to depth ratio of 2:1 with an overriding minimum depth of 5mm for non-porous surfaces and 10mm for porous surfaces. For joint widths exceeding 35mm, please contact your local Fosroc Technical Service Department.

Features:-

  • Adhesion to most common building materials
  • Single component with fast rate of cure
  • Easy to apply
  • UV resistant
  • Primerless for most applications (see "Priming")
  • Available in a range of colours
  • ISO11600:2002 Type F 25LM compliant
  • Brand- Fosroc
Yes! I am interested
View PDF
REQUEST CALLBACK
Ask Latest Price
Product Details:
Grade StandardReagent Grade, Technical Grade
Packaging TypeBottle
Physical StatePowder, solid, Liquid, Granules
UsageIndustrial


Yes! I am interested
REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandFosroc
GradeHigh
Packaging TypeBags, Bottle
Packaging sizeCustomised
General Purpose grouts types -
  • Conbextra GP1
  • Conbextra GP2
  • Conbextra GP3
  • Conbextra AT
  • Conbextra HES
  • Conbextra HR
  • Conbextra HF
  • Conbextra BPG
  • Conbextra EP10
  • Conbextra EP75
  • Conbextra EP300
Typical Uses-
Machine base plate grouting- turbines, generators,pumps,presses, steel rolling beds production machinery and crane rails.
Yes! I am interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price
Product Details:
Pack Size200l
Pack Typedrum

Concrete curing compound-
  • Concure LP90
  • Dosage - 200-270ml/m2

Exposed concrete structures, slipform structures, walls, canal linings, mass concrete faces
Yes! I am interested
REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandFosroc
Packaging TypeBottle
Quantity Per Packcustomised
Multipurpose Cleaning Agent

Removes hardened concrete from tools,machinery and equipments. Suitable for exciting of concrete floors and surfaces prior to application of resin or other surface coating

Dosage -
10-15m2/l
Yes! I am interested
REQUEST CALLBACK
Ask Latest Price
Product Details:
Minimum Order Quantity10 Bottle
ApplicationRoofs, Tanks, Walls, Terrace, Basements
BrandFosroc
FormLiquid, Powder, Solvent, Aerosol
TypeConcrete Admixture, Construction Adhesives & Sealants, Floor Hardeners, Protective Coatings & Resins, Water Proofing Compounds
Our company has been successful in winning appreciation from the clients as one of the most prominent names in the trading of Fosroc Bonding Agents.

Grade StandardHigh
Packaging Size2000 l
Packaging Typebottle
ApplicationWater Reducing Admixture
Yes! I am interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price
Product Details:
FeaturesImpact Resistant, Moisture Resistant, Vibration Resistant, Heat Resistant, Water Resistant
Grade StandardIndustrial Grade, Food Grade, Chemical Grade
Surface of ApplicationCeramic, Glass
Product Details:
TypeConcrete Admixture, Floor Hardeners, Protective Coatings Resins, Water Proofing Compounds
BrandFosroc

Features:
  • Low,medium and high build solutions
  • Rapid cure solutions
  • Self compacting solutions
  • Design compatibility
Yes! I am interested
REQUEST CALLBACK
Ask Latest Price
Product Details:
Grade StandardReagent Grade, Technical Grade
Physical StatePowder, solid, Liquid, Granules, Crystals
UsageIndustrial
Reebaklens is a combination of acid based material, corrosion inhibitors and dispersing agents and is supplied as a clear blue solution. Safe with metals (except zinc and galvanised steel), wood, glass, plastic and rubber. No corrosive action. Penetrates oil and grease
Multipurpose Cleaning Agent


Removes hardened concrete from tools,machinery and equipments. Suitable for exciting of concrete floors and surfaces prior to application of resin or other surface coating
Dosage - 10-15m2/l

Details -
  • Specific gravity : Typically 1.08 at 25C
  • Shelf life -At least 1 year in original sealed containers under normalwarehouse conditions
  • Packaging -Reebaklens is available in 1,5 and 20 litre containers
Yes! I am interested
REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandFosroc
State/FormLiquid, Powder, Solvent, Aerosol

Nitozinc Primer is supplied as a two component system based on metallic zinc and epoxy resin which on mixing gives a grey coloured liquid.

  • Anti corrosive - Active 'Zinc-rich' system combats corrosion by electro chemical means.
  • Two component product - Easy to mix and use.
  • Timesaving - Touch dry after 30 to 45 mins.
  • Excellent adhesion - Exhibits excellent bond strength in cementitious repairs.

 

Properties-
  • Specific gravity - 1.75
  • Recommended thickness per coat -40 microns (DFT)
  • Application thickness  100 microns (wet)   per  coat
  • Drying times@ 20  C
  • Touch dry- 45  mins
  • Fully dry/Recoatable -45 minutes to 1 hour.
  • Surface drying time @27C 20 to 40 mins.
Yes! I am interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price
Product Details:
ApplicationRoofs, Tanks, Walls, Terrace, Basements
BrandFosroc
FormLiquid, Powder, Solvent, Aerosol
TypeConcrete Admixture, Construction Adhesives & Sealants, Floor Hardeners, Water Proofing Compounds
Reebaklens is a combination of acid based material, corrosion inhibitors and dispersing agents and is supplied as a clear blue solution. Safe with metals (except zinc and galvanised steel), wood, glass, plastic and rubber. No corrosive action. Penetrates oil and grease.

Details -
  • Coverage -Approx. 2.0 - 2.5  m2/L
  • Shelf life -At  least  1 year
  • Specific gravity :  1.16 - 1.22 @ 25C
Yes! I am interested
REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandFosroc

Renderoc Plug is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent, rapid setting mortar which is easy to apply in many difficult conditions. The material is based on a blend of cement, graded aggregates, special fillers and chemical additives which control the rate of set and minimise the risk of thermal cracking.

Renderoc Plug provides an initial set time of approximately one minute.

  • Emergency water-stopping capability.
  • Single component - only the addition of clean water is required.
  • Excellent bond to the substrate.
  • Low exotherm minimises thermal cracking.
  • Pre-bagged formulation to overcome variations in site batching.
  • Contains no chloride admixture

Details -

  • Compressive strength Class R1 > 10 MPa
  • Chloride ion content< 0.05%
  • Adhesive bond> 0.8 MPa
  • Reaction to fire Class A1
  • Dangerous substance Complies with 5.4
Yes! I am interested
REQUEST CALLBACK
Ask Latest Price

Renderoc RG Spl is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a free-fl owing non-shrink repair micro concrete. The material is based on Portland cements, graded aggregates and fi llers, and additives which impart controlled expansion characteristics in the plastic state, while minimising water demand. The low water requirement ensures high early strength and long-term durability.

For larger repairs, the mixed Renderoc RG Spl may be modified by the addition of 5mm to 12mm clean, graded, saturated surface dry aggregates at site. For exceptionally large repairs, the local Fosroc offi ce shall be consulted.

  • Gaseous expansion system compensates for shrinkage and settlement in the plastic state.
  • Can be pumped or poured into restricted locations.
  • Fluidity to allow for placement without vibration.
  • Pre-bagged to overcome site-batched variations.
  • Rapid strength gain to facilitate early reinstatement.
  • High ultimate strengths and low permeability of cured repair.
  • Contains no chloride admixture.

Details -

  • Young's Modulus-25  kN/mm2
  • Plastic expansion Approx.  0.004N/mm2.
  • Coefficient of thermal -10 - 12 x 10-6 / 0Cexpansion
  • Thermal conductivity -1.5 W/mC
  • Fresh wet density -2100 - 2200 kg/m 3(Mixed density @27C
Yes! I am interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandFosroc
FeaturesImpact Resistant, Moisture Resistant, Vibration Resistant, Heat Resistant, Water Resistant
Grade StandardIndustrial Grade
Surface of ApplicationCeramic

Fosroc Thioflex 600 two-part polysulphide sealant is available in two grades: gun grade and pouring grade.

It is ideal for heavily trafficked floor joints, sealing movement joints in building and civil engineering structures, including superstructures, basements and subways.

Thioflex 600 gun grade is suitable for general application. Packed in a 2.5 litre tin containing the base and curing agent, it is ready to mix in the appropriate ratios. Thioflex 600 polysulphide mastic sealant is highly recommended for use in buildings that are high rise and other applications where access for subsequent maintenance will be difficult with the risk of early movement failure being minimised. It's also perfect for sealing joints in brickwork, retaining walls, basements and subway on both new builds and remedial locations.

Thioflex 600 pouring grade is supplied in a 5 litre tin, with curing agent included in a sachet inside the tin.  It is recommended for initial sealing of expansion joints and stress relief joints in floors and sealing other horizontal surfaces.

  • Forms a tough, elastic rubber like seal
  • Accommodates continuous and cyclic movement 
  • Excellent adhesion to most common substrates
  • High resistance to ageing, reduces physical damages due to climatic extremes

Details -

  • Colour: Grey
  • Movement accommodation factor: ± 30% (60% total)
  • Physical/chemical change:  Chemical cure
  • Application life: 2 hours @ 25°C
  • Initial cure: 48 hours @ 15°C 24 hours @25°C
  • Cure time: 3 weeks @ 15°C 1 week @ 25°C
  • Application temperature: 5 - 50°C
  • Hardness shore ‘A’ @ 25°C: 15 - 20
  • Water immersion:Thioflex 600 Gun Grade must be fully cured before permanent  immersion in water
  • Chemical resistance to occasional spillage: Dilute acids
Yes! I am interested
X
 

Download Brochure
Explore more products
Silica Fume
Get Best Quote
Bentonite Powder
Get Best Quote
Ammonium Molybdate
Get Best Quote
Polyester Resin Grouts
Get Best Quote
Cobextra UHS
Get Best Quote
Mahavir Chemical Industries

Hemant Singhal(Director)
16/3, W. E. A., Abdul Aziz Road, Karol Bagh
Delhi - 110005
India
Send Email
© Mahavir Chemical Industries. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited